|
|
|
|
Dry Sprinkler Boot For Use With TFP Dry Type Sprinklers
|
DSB-1
|
The Model DSB-1 Dry Sprinkler Boot (Ref. Figure 1) is designed for use with TFP Dry Type Sprinklers. When properly installed, it will help close the air gap created by the clearance hole through a wall or ceiling through which the dry type sprinkler has penetrated.
Click here for PDF
|
|
Dry, Standard Coverage, Standard Response Pendent, Upright & Horizontal Sidewall K=5.6
|
DS-1
|
The Series DS-1, 5.6 K-factor, Standard Response, Standard Coverage, Dry Type Sprinklers are decorative 5 mm glass bulb automatic sprinklers designed for the following typical uses: where pendent sprinklers are required on dry pipe systems that are exposed to freezing temperatures (e.g. sprinkler drops from unheated portions of buildings)
Click here for PDF
|
|
Standard Coverage, Quick & Standard Response Concealed Pendent K=5.6
|
DS-C
|
The Series DS-C, 5.6 K-factor, Quick Response (3 mm bulb) and Standard Response (5 mm bulb), Standard Coverage, Dry Pendent Concealed Sprinklers are decorative sprinklers featuring a flat cover plate designed to conceal the sprinkler. This type of sprinkler is typically used to provide a sprinkler drop from an unheated attic into an area where aesthetics is a concern, such as nursing homes, restaurants, schools, etc.
Click here for PDF
|
|
Extended Coverage, Quick Response Concealed Pendent K=5.6
|
DS-ECC
|
The Series DS-ECC, 5.6 K-factor, Extended Coverage, Light Hazard, Dry Pendent Concealed Sprinklers are decorative, 3 mm bulb type sprinklers featuring a flat cover plate designed to conceal the sprinkler. This type of sprinkler is typically used to provide a sprinkler drop from an unheated attic into an area where aesthetics is a concern, such as nursing homes, restaurants, schools, etc.
Click here for PDF
|
|
Dry, Extended Coverage, Quick & Standard Response Horizontal Sidewall K=5.6
|
DS-1
|
The Series DS-1, 5.6 K-factor, Quick Response (3 mm Bulb) and Standard Response (5 mm Bulb), Extended Coverage Horizontal Sidewall, Dry Type Sprinklers are decorative glass bulb automatic sprinklers. They are intended for use in applications where the sprinklers and/or a portion of the connecting piping may be exposed to freezing temperatures (e.g., horizontal piping extensions through a wall to protect an unheated area of a building). The Series DS-1 Extended Coverage Horizontal Sidewall Sprinklers are designed for extended coverage use in light hazard occupancies (ECLH).
Click here for PDF
|
|
Dry, ELO Standard Coverage, Standard Response & Quick Response Pendent K=11.2
|
DS-2
|
The Series DS-2, 11.2 K-factor, Standard Response (5 mm Bulb) and Quick Response (3 mm Bulb), Standard Coverage, Dry Type Sprinklers are decorative glass bulb automatic sprinklers designed for the following typical uses: where pendent sprinklers are required on dry pipe systems that are exposed to freezing temperatures (e.g. sprinkler drops from unheated portions of buildings)
Click here for PDF
|
|
|
